Anti - Leaking Waterproof Spray Sealant for Leak Repair and Stop

• Customization: Available
• CAS No.: 68071-29-4
• Formula: (C10h8n2o2.C6h14o3)X
• EINECS: 230-391-5
• Color: Black Grey White
• Appearance: Liquid
• Main Raw Material: Rubber Resin
• Method: Spray
• Level: Finish Coat
• Drying Method: Air Drying
• Certification: ISO14001, ISO9001
• Volume: 500ml
• Function: Leak Repair
• MOQ: 500 Cartons
• OEM: Avaliable
• Transport Package: 12 Can/ Carton
• Trademark: JUHUAN
• Origin: China
• Production Capacity: 300000PCS/Month

Product Description

Specification

PACKING	Bottles 500 ml
COLOR	White, Black
White, Black	500g
MANUFACTURER	B-HOME, JUHUAN

Product Description

This waterproof spray leak sealer is with non-component self-spraying and waterproof film. It can repair waterproof construction pipe root, pipe mouth, corner, crack, slot which have small splits. It is suitable for narrow complex space which cannot be brushed by brush tools. And, this product has unique anti-corrosion and anti-rust feature.

High tightness, easy to repair leakage, excellent waterproof capacity 

Flexible and tensile, automatically recover after stretching

Three colors: black, grey and white; good antirust property. 

Application

Applications:

Used for indoor and outdoor concrete structures, prefabricated concrete structures, cement plastering, brick walls and other base surfaces of the building floor; waterproofing works around drainage pipes, tunnels, toilets, and waterproofing and anti-corrosive construction of stone and metal pipes.

Features & Benefits
1. Easy to use, portable, aerosols spray;
2. Stays flexible and pliable;
3. Service life can be many years;
4. Adapt to a variety of climates, anti-freezing and sun-proof without cracking;
5. After completely dry, it can be painted any color.

Instruction of Use
1. Make sure the surface is clean, dry, and free of grease, oil, and dirt; and no loose structure.
2. The width of spraying on the construction surface is not less than 15cm;
3. The joints can be covered with non-woven or polyester cloth for re-reinforcement spraying;
4. Shake about 1-2minutes before spraying. When spraying, keep the aerosol can upright and the angle with the horizontal plane
must not be less than 45 degrees;
5.To wait 1 hour for curing after each spraying, and then continue spraying again, and so on.
6. Ensure that no water enters within 24 hours after construction.
7. It is recommended to cover the cracks and extend the spraying width by about 15-30cm, so as to easily cover the invisible water
seepage point. It is recommended to cover the area where it is not sprayed with newspaper or film;

Precautions
1. For unknown materials, please test spray on a small area first, and use it if there is no adverse reaction after 10 minutes;
2. To wear gloves before using it. The recommend construction temperature is 5-30 centigrade degrees;
3. During construction, please ventilate, and face the back side for construction. The base surface is dry and dust-free, which is
conducive to the coating effect. Please do not apply in rainy or severe cold environments;
4. Where the gap is greater than 2mm, it needs to be filled first.
5. Keep far away from children!

Emergency Handling1. In case of contact with eyes, flush immediately with plenty of water and seek medical advice.
2. In case of ingestion, induce vomiting immediately and seek medical advice.
3. If contact with skin, wash immediately with plenty of water and soap.
4. In case of inhalation, remove immediately to fresh air. If not better, seek medical advice.

Handling of Empty Cans
1. Before discarding, please spray the residue gas and content into waste carton, make sure the can is completely emptied.
2. If necessary condition, open the can and clean it.

Storage & Shelf life
1. The product is flammable. Store in the cool and dry place at 0-40 centigrade degrees, far away from heat sources and open
flames, and strictly prohibit exposure to the sun, puncture or incineration of the jar;
2. Shelf life: 12months.

Company Profile

Shandong Juhuan covers an area of 67000 square meters and investment of first periof is 300 million RMB, which aims to eight production lines of can. Now our factory has 14 production lines, invents two patent products. The patent product of the world establishes a standard model and receives a rave review; at the same year, we launched small cap product and three valve types,they also are our patent product. They obtain a high affirmation and favor by customers. We are dedicated to consistently serve our buyers in the most efficient and cost-effective way.

Powerful plant/PU foam pro supplier

*ISO, OHSAS quality management system.SGS certification, 25+ years manufacture experience
*2 factories,over 150000 SQM workshop,one in Beijing and one in Linyi
*14 production line,injection molding,can making,can printing,carton making workshop,full industrial chain
*39000 cans everyday output

Packing & Delivery

FAQ

1.Can u send sample to us?Yes, the sample is free to you

2.Can you give us private design?
Yes, the MOQ with private design is 500cartons; for factory design, the MOQ is 200cartons

3.Where is your port?
QingDao

4.What's your guarantee?
We guarantee goods quality is same as sample's and what we describe.

5.Can you provide us your client information?
Yes, for checking our company reputation and sample collection.

6.How many days you want to produce one 20'GP container?
2-3 weeks working days.

7.Can we visit factory?
Yes, warmly welcome to visit us at any time.