Product Description
Products Features
Foam dispensing guns are designed to create an air-tight and moisture tight seal between the gun and the can of foam sealant or adhesive.
Each gun features a flow control mechanism that permits dispensing beads from 1/8" to 3".
The ability to restart combined with pinpoint control allows maximum foam yield and minimal waste.
The Advantage Of Foam Gun
1. Easy to clean.
2. Replaceable vallve
3. Increasing the foaming capacity up to 30%
4. Low and high pressure PU foam have the same use affect.
5. Individually tested by air pressure
6. Accurate bead control
Directions for use of the foam gun:
1.Take a can of gun foam and shake vigorously.
2.Screw can on to adapter of gun(not too tight).
3.Release the flow adjustment screw lightly and dispense foam immediately to fill the entire gun with foam.
4.The foam gun i snow ready to use.
5.Foam output can be controlled with flow adjustment screw.
After use of the foam gun:
1.Leave gun filled with foam after use. Always keep a filled can of gun foam on the gun.
2.Tighten the flow adjustment screw completely. Do not empty the gun. Gun must always be filled with foam, otherwise foam is cured due to the humidity in the air.
3.Put can away in a vertical position(gun upwards).
Audited Supplier 
){kind=link}